Furniture and shelf rows

Place furniture thoughtfully

Built-in plants, barriers, benches and pedestals help structure a room. Set their physical dimensions and position, then inspect the visitor arrival and walking routes. A 2D photo is thin visually, but its pedestal or shelf has a real collision footprint. Leave space around supports and door swing areas.

A long shelf with several objects

1. Add Floating shelf and place it on a wall in 2D or 3D. Set length, depth, thickness and elevation.
2. Select a compatible object photo, book or model and attach it to the shelf. Its Position on shelf is measured from the shelf centre.
3. Place additional objects on the same shelf. Use Arrange objects on shelf to centre them with 6 cm gaps. An arrangement that cannot fit is rejected without moving the existing objects.
4. Moving the shelf moves attached objects. Moving an attached object independently detaches it; reattach deliberately when needed.

Several shelf rows on one wall

Select a shelf and use Add shelf row above. This adds an empty board of matching dimensions above the existing content, with 20 cm clearance; it does not duplicate products. Room height, openings, other wall objects and the scene limit are checked. If the next row cannot fit, shorten/reposition the board, lower the content, use another wall or increase room height.

Automatic shelf grouping

New WooCommerce layouts group shelf products into rows with a nominal 3 m maximum board length, 6 cm object gaps and 10 cm edge margins. A single wider object can require a longer board. Rows reserve content height and can stack on the same wall. Existing exhibitions stay unchanged until you explicitly rebuild; boards also count toward the 250-total-object ceiling.